Knots: make sure you know them!

Sure we know how to tie a fly on our tippet. But do you know how to tie a streamer or a nymph which wiggles freely on a 3x (or thicker) tippet? I'm sure many of us know a knot or two but specialty knots are probably unknown to most of us.

Martin Joergensens' site Global FlyFisher is an excellent site with tons of information on fly fishing and tying. Martin's illustrations of the knots seems to be stolen so often that it's probably in the 'stolen without permission section' of the Guinness book of world records and Martin hates that! So I'll just put a link here to his site where the knot section is and you can have a look there. Thanks Martin!

Why do we love fly fishing?

Last weekend my buddy Rolf and I headed for the Weisse Traun in southern Germany. It was our first trip of the year and it turned out to be a very interesting trip indeed. The warm and sunny weather of the past couple of weeks was about to end. Of the three days of fishing we had one day of rain. But all together still a very enjoyable trip.

The gin clear water of the Weisse Traun still blows my mind away. Especially when the sun shines you can see how clear the water is. This also makes a bit hard to sneak up on the fish. Still we managed to catch some very nice sized fish. The second day turned out to be a very wet day. As long as it doesn't rain too hard, the stream stays reasonably clear.

We decided to fish a different stretch on the third day. Since we never really tried the Rote Traun, a tributary of the Weisse & Deutsche Traun, we gave it a shot. Especially since a new much longer upper stretch (4 km) of the stream was added (license wise) to the existing lower stretch (1 km). The lower and upper stretch is divided by a man made dam making interaction between both stretches impossible.

The difference between both stretches are pretty big we found out. While the lower stretch is well known for the nice sized fish, the new stretch appeared to be pretty much yet to be inhabited by the fish, at least any sizable fish. The Rote Traun is also a smaller stream than the Weisse Traun. A short (<7.5 foot) rod makes casting much easier. We were hoping to see some graylings in the Rote Traun, but as in the Weisse Traun we only caught rainbows and browns (= caught in the Weisse Traun BTW). Well, the change of scenery was nice.

We are trying to figure out how to add a video stream to this blog. We filmed some action on the Rote Traun with Rolf's video camera. Fishing with a video camera is really something different than with a (digital) camera since it's such a heavy load. Eventhough the current generation of video camera's came a long way from the huge VHS based trucks, my guess is that in the near future we will see much smaller video camera's. Especially video camera's based on small harddisks will probably make a big difference in weight and size. I won't be surprised if future mobile phones are capable of making really decent video shots. Well, we'll see.

As promised we tried the new yellow colored polarized sunglasses (see posting below) during the low light situations. And boy do they work! The additional contrast and just plain bright view during low light conditions has been a huge help. Just don't forget to take along your regular sunglasses because as soon as the sun starts shining, you're bound to have a very tired eyesight or even a head ache.

This trip showed us again why we love fly fishing. For me it's all about enjoying the friendship, enjoying the solitude and generally having a good laugh.

Polarized sunglasses for low light conditions

During low light conditions like falling dusk, the regular sunglasses are generally too dark. I've never tried photochromatic sunglasses (this feature only works with glass lenses I'm told), but as soon as evening approaches I have to take off my sunglasses to see where my fly is. Obviously this isn't recommended since sunglasses are also a protection for your eyes.

Couple of months ago I was browsing in one of those car accessory shops (for our Dutch vistors: Halfords). There was a shelve with sunglasses and the bright yellow ones caught my attention. Surprisingly these were polarized as well! These 'driving glasses' are supposed to give drivers a better view on the road by taking care of glare as well as giving additional contrast during low light situations. Well, whadayaknow?...

Today I bought one of those yellow polarized sunglasses. They are pretty cheap (about 15 euros / approx. 20 dollars). The quality of the frame is barely adequate. I had to rebend one of the legs since it was off position. But again I will use them only during a couple of hours at the end of the day. These yellow glasses REALLY does add a lot of contrast! Wearing them during sunny conditions will surely give you a banging head ache. But for low light conditions, they probably work great. Keep posted for feed back on this!


*** Update 10 June 2006 ***
I bought sunglasses which are both photochromatic AND made of lightweight polycarbonate glasses. I'll report on these after my trip to the Czech Republic late July.

My 'go-to' flies

Generally I'll fish with some kind of nymph during 80% of the time. Fish feeds for more than 90% under water so that makes sense. Most streams and rivers I fish contain some species of mayflies and caddis. Some streams also inhabits smaller stoneflies like the yellow sally. And of course insects that crawl around the banks and branches that hangs over the banks like hoppers, beetles and ants.

Over the years I trimmed down the numbers of patterns in my fly box to just a several patterns. Even the numbers of sizes are trimmed down to one or two sizes. Since most of the streams I fish in Europe are some kind of freestone type streams, fish don't have the time to observe whether the fly that swims down is the correct size.

My favorite nymph patterns over the years have been pretty consistent, both in European as US/Canadian destinations. Obviously, local patterns won't be neglected. Although I like to keep my fly boxes to a minimum I'll always have enough of these patterns:

* Bead head caddis pupa in some shade of olive.
* Pheasant tail type of nymph (I got rid of the wing-case to save tying time). I prefer darker shades for these nymphs.
* To imitate smaller type stoneflies as well as a general 'attractor nymph' a Prince nymph (with and without bead head).

Another variant on the general may fly nymph is a rubber legged version. I have used many rubber leg nymph patterns over the years and I found them to be very productive, especially when the regular nymphs aren't producing. My guess is that the fish are fed up with the same dish served by fly fishermen and are looking for a nice juicy cheeseburger.

I'll give the nymph a twitch every couple of seconds during a dead drift. This pattern is based on a general may fly type nymph. Basically any nymph pattern can be adapted to a rubber legged version just by adding some strands of rubber around the thorax area. Sizes 10 and up work great as stonefly nymphs.

The remaining 20% of the time, I'll try a dry fly (or a streamer) of some sort to play a different game. Especially spots with nice undercut banks, overhanging brushes and trees are potential areas to switch. Caddis patterns like the Elk hair caddis, CDC & Elk or even a small hopper pattern will work. Parachute style dry flies, both regular style as well as emerger / Klinkhamer styles, will do. The white parachute posts one usually sees in these patterns aren't visible as well as they should. So I changed my posts to a 'hot orange' color. This color is visible both during light and low light conditions. It's even visible when it rides a heavy current.

I just love the big strikes when fishing with hoppers. Last summer I changed my favorite hopper pattern. The Alien Bug is my hopper pattern to go. It's easy to tie, it floats and it's durable. I haven't tried it in Europe since I got back from my US / Canada trip, but I'm sure it will get its share of playing time.

The Humpy is a very versatile dry fly. It's a searching attractor pattern, it can be used as a beetle imitation as well as a general heavy current dry fly since it floats so well. Just have some in your fly box!

I must admit I've never given the good old ant pattern a try so far. Probably because they are so hard to see! There is no doubt that ants are available as a food almost year round. Probably the most common land insect of all. So, I tied a few dozen ants in sizes 18 to 22 this winter. We'll see what happens.

About streamers, I'll come back in a later posting. We have to wait for about a week before heading to southern Germany. Can't wait!

So which are YOUR favourite patterns?

Fly fishing season has started!

At last! The weather is finally warming up as more days have increasing sunny periods. We planned our first trip to the trout streams in southern Germany for the second weekend of May. Can't wait to go after those hungry trouts!

We'll get our appetite going by getting our fly boxes ready for the season. We'll post some pictures of the flies we use as well some new experimental flies we want to try out (at least for the European trouts).

Keep posted for more news on our preparation for our first fishing trip of this year!

The Adams Family travels (I)

I've always loved giving (experimental) flies away to friends who try them out on their favorite streams. After all that's what flies are made for. It's also an easy way to try out new (or altered) patterns in spite of not having a nice trout stream running in my back yard.

One of the nice memories is how my humpies fooled some nice kiwi browns and rainbows by a New Zealand guide. The idea of traveling to the other side of the world and fooling a trout almost makes up for not being there my self.

Well, for the mean time... Unfortunately those days were before the digital camera's. I must have some pictures of those trouts stashed away somewhere in my house.

Bill Taylor, maker of fine bamboo rods (Bill's quad rods seems to be really something else), told me that he was going to fish the Catskill area this spring. Since the Adams is one of the most well known Catskill flies we agreed to do a little all-expenses paid trip for the Adams Family.

The idea is to get these flies on the Catskill streams and do what they do best: fool fish. I tied half a dozen Adams in size 14 and 16 this week. They are now ready for shipment to Bill in a film container.

To be continued....






Update 8 April 2006:
The Adams Family has been shipped!

Update 22 April 2006:
The Adams Family has (finally) arrived at their destination! Pictures to follow.

Classic reels

Large arbor reels are the buzz these days. The advantages of these reels makes sense and they look great on graphite rods. On classic graphite rods and bamboo rods, there's arguably no discussion that classic reels are the ones to match. Classic reels have this distinctive look which no modern (large arbor) reel comes close. For my fishing with bamboo rods I use an Orvis CFO III or a Hardy Perfect 3 1/8 inch RHW (Right Hand Wind). The vintage look of these reels just look right on a nice bamboo fly rod. I use the CFO for lines up to 4 weight. The Perfect will be used for 5 & 6 weight rods.

Orvis started selling the CFO since 1971. A design by Stanley Bogdan, the CFO has been linked to Orvis as the Big Ben is to London. The original CFO's were made by Hardy for Orvis. During the 1990's another british reel company called BRF (famous for the Dragonfly reel series) took over the manufacturing. This year the CFO's design has been changed (oh no!) and manufacturing has been shifted over to the far east.

Hardy started making the Perfect in 1891. Until the last Perfect in the 1980's, the original design hardly changed and stood the test of time. Another reel I like is the 3 inch version of Hardy's St. George. And of course, the ever beautiful Lightweight series made by Hardy. These reels have been made by Hardy since the 1951 and have been a big hit ever since.

Update 9 june 2007:
Here's a nice overview of the history of the CFO reels.

Update Dec 2009:
Hardy has reintroduced their classic reels, Perfect and the St. George. These reels are just gorgeous! Especially the 2 7/8 inch and 3 1/8 inch Perfects and the 3 inch St George are perfect for trout fishing. Get one while they last. You won't be disappointed.

No Fly Fair this spring

The Fly Fair (the original!) which was supposed to be held this spring (May 6 & 7) in The Netherlands has been cancelled. The first Fly Fair was held in 1985 in a tiny town called Hattem and since then the idea has been copied many times by other fairs all over the world.

It seems that there is a serious lack of commercial interest from the (Dutch) shops who attend the fair and pay a big part of the bill. The reason behind this boycott is still not spoken out loud, but it is suggested that one (or more) of the initiators of the Fly Fair has mixed commercial interests.

Well, it's just all too bad for all the people who were looking forward to some good old fashion fly fishing fun. We'll see what happens next year.

Dahlberg divers

It must have been sometime in the late 1980’s. I watched this badly copied VHS video called ‘Fly Fishing for Pike with Larry Dahlberg' about fly fishing for pike using floating bugs. Although the image quality was awful what I saw really caught my attention. This fly nowadays known as the Dahlberg diver (the original pattern and name Larry used for his diving bug is Mega Diver and was tied with a long haribou and flashabou tail rather than hackles used these days which mimics frogs) was making those pikes go nuts. By strip retrieving, the bug dived like a plug and came up if you stopped the retrieve. This action was achieved by the unique way the head of the bassbug was shaped.

Many years later I found the article called Super Fly! in Fly Fisherman magazine (September 1983 issue) where Dave Whitlock writes about Larry Dahlberg introducing the Dahlberg Diver to him on a fishing trip on the St Croix river in Wisconsin.

During the early 1990's I watched another video called Tying Bass Flies with Jimmy Nix. Jimmy Nix is a well known fly fisherman and tier of largemouth bass and saltwater species. I’ve watched this video endlessly. Another video I can recommend is Fly Tying Bass Flies with Dave Whitlock.

During the early 90's I also met Chris Helm. Chris is, besides being a very nice guy, a master with deer hair. His tying video's are world famous. Chris also runs a business selling quality deer hair. He sent me patches of deer hair I couldn't get here in The Netherlands. I started experimenting with muddlers, hoppers and humpies. Bassbugs was just a logical step.

So, what's so great about this bug? It's just plain fun to tie these colorful critters. Using different colors of hair you can make very colorful creations, only limited by your imagination. Especially using the stacking technique, very realistic (or wild, depending on colors used) color patterns can be made. Using a good pair of sharp scissors (I love those ice tempered scissors) and razor blades you can shape the ball of hair to any shape you want.


Here are some essential tools I use when tying my bass bugs:

• A pair (a curved version as a second is nice) of ice tempered scissors (I use Thompson scissors which are no longer available. Anvil makes good scissors too).
• A long nose bobbin (I prefer the Materelli bobbin).
• Tying thread I prefer Danville's Flymaster Plus (a good alternative is Uni-thread's Big Fly, which is a bit thicker than Flymaster Plus). Some prefer gel GSP thread.
• A large hair stacker.
• Double sided razor blades.

Here is an excellent article by Chris Helm about selecting deer hair for various purposes.


Update May 2012:
Here are two of the Dahlberg Divers shown above now framed together with a little deer hair mouse I tied for Rudi Heger. The framed box hangs on the wall of the fly shop.








Update Nov 2, 2018:
Larry Dahlberg himself approved the diver

Keep in touch with friends

I remember calling to overseas costing a fortune. Not sure how much exactly but it was high enough to keep the calls short. These days the phone prices came down to a level that it's slightly higher than calling to local numbers. Then came Skype. This program allows you to call other Skype users all over the world without costing a penny or to a regular phone even cheaper than your local phone calls. Calling to regular phone numbers using the Skype program you need to buy credits (called SkypeOut) from Skype. The prices for calling regular land line numbers all over the world are dead cheap. Calling over the internet is called VoIP (Voice Over IP) these days and it supposed to to be pretty big in the next couple of years.

The fun using Skype is that you get to talk to your friends much easier and frequent than you were used to. I got to talk to my buddy in Idaho just about every couple of weeks while we used to write letters (those were dinosaur days by the way) and e-mail. Since Skype is also an Instant Messenger like MSN Messenger or ICQ, it's also easy to track who is on-line or not. This is obviously not available for your contacts in the list who only have regular phones.

Skype has this neat feature called Conferencing. And it's just what it says: you can talk to more than one (the participants can be using Skype as well as regular phone) at the same time. Skype allows up to 4 people. So if you want to talk to your fly fishing buddies all at the same time, this is great fun!

There are similar programs now which work pretty much like Skype: Gizmo Project, Yak and Jajah (what's in a name?). Even Google has a program called Google Talk and guess what, Microsoft announced to come with a calling option in their future releases of MSN Messenger. Skype has the largest user-base so far and it's available for most platforms including WIndows, Mac, Pocket PC and Linux. Others are only available for PC and Mac while a few are PC only.


** Update Feb 2006 **
Jajah dropped the idea of using a program to call your friends. Rather they changed their application to a web-page where you enter your phone-number as well as the person you want to call. Jajah takes care of the the connection between the two phone-numbers. You will be charged with Jajah's own proprietary rate which is obviously (supposed) to be a lot cheaper than you regular carrier.

This is an interesting solution to the ever fast moving world of VoIP. Jajah's solution bypasses the idea of needing a broadband internet connection as well as the hassle of having to install a new application.


Gizmo users can talk to GoogleTalk users and vice versa! We need more of these inter-compatibilty pacts!

Another VoIP-like program appeared in the arena: SightSpeed. This is a program similar to Apple's iChat in terms of just offering a audio and videochat rather than including options to call regular phone numbers (like Skype and Gizmo). Recently a Mac version has been released next to the PC version. SightSpeed seems to be a solution to a problem which Apple never (wanted to) solved: videochat with both Mac and PC users.

Beauty of bamboo fly rods

As I wrote in my posting 'The Weisse Traun in June' I started appreciating nice bamboo fly rods several years ago.

I haven't seen and cast many bamboo rods so far (I guess about 10-12 rods: I remember a couple of Orvis'es, Winstons, several T&T's, Tom Morans, RK Bolt, Zumbrunn, Brunner, Bjarne Fries and Granger), so I'm no expert but there seem to be an understated elegance of these rods. Much more than factory built graphite rods, with bamboo rods little details are used to give the rod that personal touch. 

I've seen special wrapping details (like the single wraps on Tom Moran's rods), nice ferrules (wrapped ferrules on Winstons) or swelled butts on the T&T (also Tom Moran makes a delightful swelled butt). These details should not be overdone by the way.

Most bamboo rods aren't casting canons nor as light as graphite rods. But they aren't slow (unless made that way) or heavy as many think. In fact some rods (like Brunner) are so fast that I don't think they would make good fishing rods. I've cast some excellent casting bamboo rods. You won't see distance records with bamboo rods, but they have a way to handle a wide range of casting situations. Especially the ability to cast with just a couple of feet of line yet still able to deliver a 15 meter (50 feet) cast is amazing.

The possibility of altering or tuning the taper when building the rod makes bamboo an extremely versatile material. Much more than the way graphite rods are made, the maker can adjust the action of the bamboo rod. And of course, the journey the rod has made from bamboo pole growing in the Guangdong province of China to the workbench of a (master) builder who spent dozens of hours shaping the split bundles of cane to a fine rod is just inspiring.

Don't get me wrong. I really like my graphite rods and I will keep fishing them. Like the buttery smooth casting Orvis Trout, the first production graphite rod Orvis made (since 1974?). This rod casts like magic with a 5 weight line even though the rod was rated for a 6 weight. My Tippet is one delicate mother, yet still will deliver a weighted bead head with ease. I still own these rods with the original cosmetics (unsanded blanks) and brushed bright aluminum hardware. After 1986 (?) Orvis started to make the Superfine series with black anodized hardware (and the 25 years warranty). By the way, the current Superfine series with the sanded blanks are horrible!

Take the Sage Light Line series with their translucent burgundy red blank. This is an excellent rod for spring creek like conditions. I bought my Sage 490-4 LL at Craig Mathews' shop Blue Ribbon Flies in 1992. The Sage 586-3 SP with its swelled butt is one handsome rod and fishes equally exceptional. But a light bamboo fly rod (I prefer fishing with graphite for line weights above a 5 weight) has this spirit no graphite rod comes close. It has to be felt to understand but fighting a fish with a bamboo fly rod does feel different. Maybe it's just the set of mind?

Past fall I was cleaning up my fishing gear and getting them ready for their winter storage. While my rods were drying on top of a couple of chairs, I saw how nice they looked. It has been pretty cold the past couple of days, so here are some pictures to warm up. I'll share some pictures of my graphite rods in the future.

Humpy

Don't you just love the Humpy? I do! The Humpy is a fly that has achieved stardom in the western states. Very buoyant and the many tying variations on this fly makes it a very adaptable and wonderful fly for fast & furious water conditions.

I was fascinated (maybe obsessed? 😀) after I watched Jack Dennis' VHS video 'Tying western trout flies' back in the late 1980's. Unfortunately getting good deer hair (short tipped and not too coarse hair) for tying humpies was quite a challenge here. A few years later I met Chris Helm at the Dutch Fly Fair who helped me tremendously with getting good deer and elk hair for all kinds of flies.

The history of this fly has many stories, but it is believed that it was developed by Jack Horner in the 1940's. The 'Horner deer fly' or the 'Goofus bug' were names that were given by different people during different times. These days the fly is known as the Humpy. A great name it is!

The Humpy is quite a difficult fly to master. The different materials that is needed, handled and the tight margins of proportions it has to be tied makes it a fly that's loved and hated by many tiers.

Deer hair that is needed for the Humpy should be coarse but not too coarse (the tightening down of the 'hump' will cut right through the hair if it's too coarse or brittle). The tips of the hair should be short and even to give the wings that nice and neat silhouette. The hump should be neat, tight and even to show that typical part that makes the Humpy such a very recognizable fly.

The amount of hair that is needed differs from the size that is tied. Too small a clump of deer hair and it will look like a starving crane fly, while too much hair will mess up the balance of the fly as well as almost impossible to maintain the control of the hair going every direction but the right way. The best deer hair I've come across come from the brand Mission Mountain Hair. It's not readily available so it's kinda hard to come by. I've only seen this hair available at a fly shop I visited in Craig, Montana called The Trout Shop.

The right proportions of the Humpy is a crucial part of this fly. Ever slightest disproportional error will show up as a badly tied Humpy, more than probably any other (dry) fly. The balance between amount of material that is used, the size of the 'hump', a nice tail, the size and length of the wings and a nice full (but not too full!) hackle can make or break this fly from being a show-stopper in your fly box.

But if all goes well, this fly is a gorgeous fly to look at, versatile as very few flies can be (seems to be one of the 'must haves' when you want to fish the huge browns and bows in New Zealand) and just downright fun to tie. And the Humpy is a fly that can go as an imitation from anything from a fluttering caddis, beetle to an emerging mayfly.

Update March 2, 2026:

Jack Dennis dug out this video (partly on my request) of Andre Puyans tying a Humpy.

Really interesting how Puyans tied his Humpy!

Update Feb 12, 2025:

Jack Dennis uploaded a video of Jay Buchner how to tie a Humpy correctly.

Jay is the husband of Kathy Buchner. Kathy wrote an article on tying the Humpy in the late 1990's in the Fly Fisherman magazine.

Update Dec 25, 2023:

Update Nov 3, 2023:

I did a tying demonstration for April Vokey's website Anchored Outdoors.

Guess what I tied? 

Update Oct 30, 2023:

Gordon van der Spuy thought writing a book wasn't enough and came out with a 2nd book.

I wrote a chapter about the Humpy

Update Aug 12, 2023:

Another artist painted a Humpy for me.

This time by Cindy Day

Update April 16, 2022:

I received a package from Jack!

Update March 22, 2022:

Another video on tying the Humpy, this time by Jay Buchner.

Lots of information on the history of the Humpy too.

Here you also hear that André Puyans was the originator of tying the Humpy by tying the wings first.

Jay is the husband of Kathy Buchner. Kathy wrote an article on tying the Humpy in the late 1990's in the Fly Fisherman magazine.

Update May 15, 2020:

A Humpy swap with Charlie Craven

Update Jan 30, 2020:

Here Jack ties the Royal Humpy:

Update Dec 13, 2021:

Jack uploaded footages from his huge video collection on YouTube.

Here is the Humpy tying part from his 'Tying western trout flies':

Update Sept 3, 2021:

So what does the Humpy exactly imitate?

Update July 19, 2021:

More Humpies heading off to USA, with a comment by Jack Dennis.

Update June 29, 2021:

Check out the Humpies I tied for Ed van Put, the Catskill legend.

Update April 17, 2021:

Check out the rare Humpy tied by André Puyans I acquired.

Update Nov 9, 2020:

Jack Dennis is unmistakenly connected to my love for tying humpies.

Today Jack celebrated the 49th year being together his wife.

Update Feb 8, 2020:
Here's a framed Horner fly alias the Humpy tied by the man himself. Thanks Gary!

Update March 2014:
The brand Mission Mountain Hair is no longer available. I recommend Nature's Spirit for deer and elk hair now.

Trout Grass

Trout Grass is a documentary on the journey Tonkin bamboo, the material to make bamboo fly rods, makes from mainland China to Twin Bridges, Montana. I have read many articles and some books on bamboo fly rods, but none of them really gave much information on the area where the bamboo grows and how they are harvested. Trout Grass fills up this gap very nicely.

During the 45 minutes it shows how the Tonkin bamboo is harvested, transported down the hills and cleaned by the local people who make a living out of this amazing product of nature. This specific spieces of bamboo grows only in a small area in the Guangdong province of China.

The second part of the movie shows how Glenn Brackett of RL Winston Rod company crafts his famed bamboo fly rods out of the very few bamboo poles that made the cut during the selection proces which started all the way back in China. How amazing it is to know that such a plant (a family of the regular grass that grows in your back yard) ends up as a high priced and masterly crafted fly rod.

I really enjoyed this documentary. Too bad there is no 'The making of' or similar extra footage on how this documentary came together, interview with different people who worked on this, maybe some funny stuff on when things went wrong, etc.

This is not a how-to-make bamboo fly rods movie but a documentary showing how 'important' bamboo and the bamboo fly rod is for one half of the chain versus how bamboo has been a part of the Chinese culture for millenniums as source for many applications and is crucial for the local economy. You don't need to be a bamboo junk, but for anyone who wants to know more about this amazing journey of the Tonkin bamboo this DVD is a must see. More info (as well as some small movie clips) on Trout Grass and how to order can be found at the site of Trout Grass.

Ordered my first custom bamboo rod!

I just ordered my very first custom built bamboo rod!

I ordered a rod from Homer Jennings. The exact specifications aren't definite, but I want a 3 piece rod for traveling conveniences. I also want a slightly longer rod than the 7 foot rods I already own. Length longer than 8 foot seems to make bamboo rods uncomfortably heavy. My choice is a 7.6ft rod, but I might even consider a 7.3 ft rod. I want a rod which I can use for various conditions and is capable of handling dry flies, hoppers, weighted nymphs and maybe an occasional small streamer, so some authority is needed. I think a #5 rod would be more versatile than a #4 rod.

I have been reading a lot on bamboo rods the past couple of years. Although I still consider myself a rookie on this subject, I have seen that there is a large variation on tapers giving each rod a different action and feel. I do have an opinion which type of action I like best. I like a medium-fast to fastish rod. It should cast well close (10 feet, 3 meters) up to 30-40 feet (9-12 meters).

Homer told me that it will take about 14 months to deliver, so I have a lot of time to think about cosmetics (grip shape, hardware, wrapping color, etc.), so keep posted!


Update Feb 2, 2011:
Today my Jennings rod arrived! The rod was finished by Homer on Dec 27, 2010. That makes it a 6 year wait. It 's a 7.3ft 3 piece for a 4 weight with an extra (3rd) 3 weight tip. The rod looks like a jewel. The finish is simply superb.

LED lights

It's past 8 PM and the hatch is really intense. The dusk is making it difficult to see the fly. Ever tried to tie a fly in the dark while fish are rising between your legs? By the way, where did I put the damn flash light?

Fishing during dusk and/or night has always been an awkward operation. I hate to fish at night because I want to see what I'm doing, be it tying a tippet or a fly. And when I'm done fishing I want to see where I'm walking. A nice twig in my nose isn't funny. So carry a flash light!? The usual flash lights are inefficient in terms of energy consumption (full lighting for just a half an hour and gradually lower light intensity), vulnerable (these bulbs always die when I need them) and just plain heavy. We fly fishermen tend to travel light, but a lightweight flash light also means small batteries and guess what? These little critters are dead faster than the you can say mother-in-law...

The recent years the so called LED (Light Emitting Diode) technology has made great improvements in lighting devices. These LEDs have come a long way since they were used in calculators and digital watches in the 1970's. Nowadays traffic lights, rear end lights of cars and acres of video displays in big cities use LEDs. In the future you'll probably see more LED applications in your home as well.

What's so great about LEDs? They are:

* extremely durable in life-span (10+ years) as well as being plain tough;
* compared to regular bulbs LEDs have extreme low energy consumption as well as energy loss through heat;
* produce very bright light;
* produce very focused light without the need of mirrored hoods.

This all means that LED lights can be very small, light and easy to operate.


Take a look at a LED light I found a couple of years ago at my local outdoors shop. This little critter is the diameter of a golf ball, since it uses button cell batteries it's as light as a pen. Since LEDs are so energy efficient, they easily keep emitting bright light for a dozen or more hours. I haven't tried them extensively for more than a dozen of times for several minutes. But on my recent trip to Canada I used them for about 3 hours non stop during a nightly fishing on the Bow river (damn mosquitos!) in the city of Calgary and they are still going strong. I do keep spare batteries in my vest.

This LED called Ear-Lite is worn on your ear, pretty much like those Bluetooth headphones for cellular phones making hands free operation a breeze. It fits comfortably on your ear, but too abrupt head movements can shake it off your ear, so you need to remember that. But since it's attached to your head, it lights up the spot you look at. The angle of the lighting can be adjusted so everything from just under your nose to several meters / yards in front of you can be lit. And I'm telling ya, this critter produces some hefty bright light!

Besides for fly fishing, this LED Lite is also quite handy for reading without disturbing anyone next to you like in the car, train or airplane. There are many other equally small LED lights available these days. From key holders to one that you can clip on the visor of your hat. For heavy duty applications (both in amount of light as well as lighting time) there are more (most head mounted) LEDs to be found at your local outdoors shops. Petzl seems to be the leading brand in head mounted LED lights.

Never without drinking water

Have you ever been without water hours away from your car? Imagine the idea of hours walking back to your car in the hot sun. The fishing was great, but you could really appreciate a nice cold drink...

I always carry a bottle of water with me (in a bottle holder attached to my wader belt), but it's usually not enough to last a whole days worth of fishing. My worst story so far was that I 'buried' several cans of pop (Coke, 7 Up, etc.) in a stream with a couple of rocks to keep them cold. After a hot day of fishing we came back for a nice cold drink, but the cans were gone. My best guess is that they came loose due to the flow of the water and are probably still floating in the pacific ocean now.

There are several options to assure yourself of having enough water to drink. Carrying several bottles of water is a lot of weight you have to haul. Other option is a hydration system like Camelbak or water reservoirs which you can put in a backpack or the back pocket of your vest. I've tried them too but again, you will have to cope with a lot of extra load in your back. The thing I don't like is that the water tastes bad out of these rubber reservoirs. Because you're carrying it in your back, the water warms up. Finally these reservoirs are hard to clean, so after a while I'm not really looking forward to drink water out of a fuzzy looking reservoir. Platypus also makes hydration systems. Their reservoir doesn't have the bad rubbery taste, but their reservoir is also very difficult to clean.

It's funny that this cold and clear water you're fishing in looks like drinkable water from the tap. But with exception of very clear and clean springs, it is advised not to drink. Contamination like Giardia, sediments and other nasty little debris can make you real sick.

On my recent trip to the US my buddy Doug had this empty bottle with a (replaceable) filter. Although I had my usual bottle filled with bottled water, half way through the day it was empty. I watched Doug fill up his bottle with cold water from the Coeur d'Alene river and drink it with a big smile. I was a bit reserved on drinking water from the stream, but Doug assured that the filter takes care of 99.9% of the bad stuff in the water. Instant cold and clean water!

Doug sent me a new bottle with a filter as a gift (thanks Doug!). I was surprised that the bottle is the same bottle I already own, except for the removable filter. This company Aquamira makes a lot of outdoors equipment, so I guess they know what they are making. The filter works up to 200 refills, so that should easily make 75 - 100 days worth of fishing. For me that's probably at least 4 years. A replacement costs about 20 Euro's (or 20 US Dollars), so that's pretty good value. Check out your local outdoors shop for similar products.


So, my hydration system is: a bottle filled with bottled water and the seperate filter in a zip-lock bag to use when my bottle is empty. This way, I will never be without water and still 'travel light'!

Subway in the low lands!

Subways finally landed on the low lands! I knew there was one in The Hague, but I wanted one in Rotterdam. And it's there now! Today during a quick shopping for some new stuff for my wardrobe I stopped for a steak & cheese sandwich at Subway. Tastes as good as I remember from my recent US & Canada trip.

The Rotterdam restaurant is housed in what was once the internet cafe called EasyInternet from the Greek entrepreneur Stelios. He is also known for his air carrier EasyJet. During the mid 90's fast internet connections weren't common as these days. The slow and tedious dial-in connections at home of those days were a pain in the ass. A visit to EasyInternet showed us how nice surfing the web could be with a fast connection. We were able to download mp3's within minutes rather than half an hour or more. I remember my buddy Eric-jan downloading some top 40 songs to please his then (now his wife) new girl friend! :)

Fly tying + Essentials = Travel light

For my tying I use a Dyna-king Professional. The Dyna-king is as robust as a vice can be without being (and looking) bulky. It holds a hook as firm as one would like for bass or saltwater hooks yet still you can adjust the holding power for midge hooks without damaging them. I always hated the all-or-nothing holding of the Regal-style vice. There is simply no way to adjust the holding power of these vices. Unlike many other vices, the adjustable Dyna-king jaws still 'locks' down rather than 'tighten' (knop, lever) the jaws. My humble opinion is that the lock down system is superior over tightening.

The Dyna-king allows you to rotate the head to check out all the sides of a fly. It's not a true on-axis rotary vice like the Renzetti or Lawrence Waldron vice. Some folks like them, but I don't like the limited working space behind the head of these vices. For a review of many of the current vices on the market, check out this article at Fly Fisherman (it's an old article by now, so there are some layout issues when you try to access the article). Do keep in mind that the authors have their own preferences, so check out the vices yourself (if possible) to make your own decision which vice suits you best.

Eventually I also used to carry around my Dyna-king and the heavy pedestal while traveling. Obviously this wasn't working, especially when traveling overseas. I needed a true travel vice! There aren't many travel vices which I would consider being a TRAVEL vice: easy to carry, light and still versatile. I checked out the vice that comes along with the Marco Polo tying kit from C&F. This wasn't what I was looking for....

First, I don't need all the tools that comes along. Second, with all the tools and the carrying case (very neat though!) it's still as heavy and bulky as carrying the Dyna-king. Third, the vice looks too vulnerable to me. The tiny head with it's tiny knobs are too flimsy. Finally, the price tag is huge!

Then I ran into this peculiar pocket knife-like looking vice. This vice called the Travelmaster folds into a size of a swiss pocket knife, while unfolded the vice would let you adjust the angle in various positions. The German engineering ensures a bomb-proof quality. It's what a travel vice should be: it's small, light (well, lighter than the pedestal) and it's robust. Too bad the vice comes with a very spartan leather bag with a string. So, I bought a small camera bag to store the vice.

I used to lug around this huge fly tying bag from JW Outfitters (now out of production) where I would stash every tying material I had. I could barely close the bag! Sure I had everything with me (okay, I also had a seperate duffel full of hair when I was really into tying bassbugs). This is of course a traveling nightmare. I needed to scale down this habit of carrying everything with me.

The past couple of years I carry a small bag from Eagle Creek (called cubes) as my tying kit. It's basically a small sized clothing bag with only a zipper. No seperate compartments, no handy see through mesh bags or specially molded coffee cup holder. Just a nice little bag to store my essential tying stuff. And boy, this helps when you are traveling by air!

To keep the different tying materials organized, I use these zip-locked bags with the neat little zippers on top. Regular zip-lock bags would be fines I guess, but the zippered ones I can count on that they won't open up without notice. I only stash the the bare essentials. One bag is filled with tools and hooks (in type and sizes for only flies I fish with) while others are filled with some hair, synthetic stuff for wings and bodies, special dubbing and feathers (hackles, etc.).

Talking about neatly organizing: check out this little container with these neat little compartments (15 on each side, 30 compartments in total) which I filled with my most used dubbings. I saw this box many years ago when Partridge came out with their SLF Davy Wotton Masterclass dubbing.

Well, I hope you picked up some tips here. My motto when traveling, whether within Europe or going intercontinental: travel light!

Any questions? Please feel free to leave a comment with your e-mail address and I'll get in touch with you.

Update 2012:
The Travelmaster is no longer made...

Update 2012:
After many years of duty my Eagle Creek cube died. Eventually I was about to get a new one, but then I thought why not check out the toilet bag from Eagle Creek? Besides being small enough, it also has several compartments (both zippered and just pockets). Now this neat little bag is my tying bag.

The end of (an era at) Winston rod company?

This weekend the bad news came: the whole bamboo crew (Glenn Brackett and his colleagues Jeff Walker and Jerry Kustich) resigned from the RL Winston Rod company as it seems. The story is that there is a difference in view about the successor to Glenn. The management wants to hire a successor on their merit while Glenn feels that he is the one who can say who is capable of continuing the bamboo tradition that made Winston so famous. The other issues seems to be that the management wants a huge production increase (2500 rods vs the ca. 100 now!).

This is certainly the end of an era (Glenn has worked 30+ years at Winston) and probably we are looking at the end of a great name (more than 75 years) in bamboo.

Not sure what will happen to Winston bamboo rods, the older ones and the new to be built rods. The older ones built by Brackett surely will increase in value making them even more out of reach for the average Joe. The quality of the new bamboo rods will definitely be different from the Brackett built rods. But maybe a new master builder will stand up to take Winston to the next era as a premium bamboo rod company. Although I doubt that any ambitious maker would like to work under the conditions of the current management...

Here are some articles from/about Glenn:
Glenn's view on bamboo rod making (Part 1)
Glenn's view on bamboo rod making (Part 2)
Glenn's view on bamboo rod making (Part 3)

Glenn's regret on selling Winston to Ondaatje

Glenn and the Boo boys opened their own bamboo rod making company in 2007: Sweetgrass rods.

Update March 2015:
Here is a more recent interview with Glenn.

Picture books by Apple Computers (part III)

So after about two weeks the book arrived. Even the packaging is stylish: a nice box with a big Apple logo on front. Inside de box, the book is wrapped nicely in a plastic sleeve. The first thing I noticed was that the book really feels like a book.

Let's take a look at the book! The hard cover is coated with a tightly woven texture giving the book a warm appearence. The card box that is used to give the cover the sturdiness feels pretty firm indeed. The inside part of the cover is nicely layed with a profiled sheet that forms the blind pages. The pages are glued and bound firmly. A close look at the pages that are bound shows that the pages are tightly alined. I'm not sure how durable the gluing is, but it looks a lot tougher than some professionally printed books I bought. The double side printed pages are glossy and has the right thickness.


Now, what about the quality of the pictures? I must admit I was pretty skeptical about the quality. The print outs of digital camera's I've seen so far were generally pretty grainy, especially parts with contrast and/or color differences. The pictures were probably made with camera's in the 3-4 megapixels range and probably also shot in a lower resolution than it was capable of. The more recent camera's in the 5-8 megapixels range should give better results.

A close look at the pictures in the book show that they are just below professional print quality. The sharpness is probably comparable to pictures in magazines, maybe a tad better. As mentioned before, digital camera prints can't compete with the quality of the traditional analog 35 mm film prints yet. Especially if you look real close, you still can see the 'dots' or pixels that forms the picture. Since I used many different pictures in different sizes, I wondered how they turned out. Uncropped or slightly cropped pictures turned out pretty good as (nearly) no resolution was lost. Parts (cut out) of pictures which were enlarged, some to full page while others as part of a multi picture lay out, suffers from some visible graininess. But again, this might be a lot less visable if on a smaller size book (or print out).

On the coloration side, the pictures turned out excellent. Pictures with good contrasting backgrounds are really amazing (check out the panoramic pictures). Some pictures were edited using iPhoto's 'temperature' altering function making the colors more vibrant. Other pictures, especially with darker areas and/or taken with low light situations, this alteration made them worse.


Check out some of the more technical parts of the book:








Well, this was my first iPhoto picture book. I am surprised how nice the book turned out. I had a lot of fun creating one and the joy of having a nearly professional looking picture book has to be experienced. If you want to make a memorable happening or trip to be truly lasting, you should seriously consider making a picture book. I'm sure you'll enjoy browsing through it and walk back the memory lane many times to come...